Product Details
  • Model: PA-A2D
  • Units in Stock: 996

Analog To Digital Optical Spdif/Coaxial Audio Converter

This Analog Audio to Digital Converter has a set of right/left RCA analog audio input. It will simultaneously convert the analog audio into Coax and Optical (Toslink) Digital signals. You can connect either or both outputs to an appropriate digital audio input on a TV, AV receiver, or anything else.
Simply plug in your analog audio source into the RCA input ports, then connect your digital receiving device to your choice of either coaxial or optical digital output.
Both digital outputs may also be used simultaneously. Power-cycle all connected equipment, and you will be enjoying digitally converted audio from your analog source at the receiving device.
The digital output signals will be a 2 channel uncompressed LPCM (linear pulse code modulation) with sampling rate at 48KHz.
Very user-friendly, easy to learn, and easy to install.
Converts analog L/R RCA input to SPDIF Optical or Coaxial digital PCM audio .
Supports 48 kHz output sampling frequency.
Ultra low jitter and high fidelity design using new 192kHz Digital Audio Receiver & 24-bit 192kHz ,192KHzDAC Chipset.
Supports uncompressed 2-channel LPCM digital audio signal output. 
Provides electromagnetic-noise-free transmission
USB power option - use USB port to save one AC outlet, you can also use your phone charger to power it. We offer a USB power cable(Power adapter is not included), you can use it to connect to your PC, TV, or 5V USB power supply. 
Input Audio: L/R audio
Output Audio: Coaxial + Toslink digital audio signals
Input audio connector: 2 x RCA(R/L)
Output audio connector: 1 x Toslink, 1 x RCA (Coaxial)
Frequency Response: < +/- 0.5dB 20Hz-20kHz
Crosstalk: < -85dB
RMS Level (CH1 / CH2): 1.0 Vrms analog input at the -7.4 dBFS digital output level
Power input: 5V DC(We offer a power USB cable) 
Dimensions: 76 x 56x 22mm

Add to Cart:

WARNING: An Error occurred, please refresh the page and try again.